Shower Upgrade 101 - Top Tips For New Unit Installation

Call Us Now

What're your thoughts on How to Install a Direct-to-Stud Shower Enclosure?

A successful shower installment calls for mindful preparation and a lot of work. For the most part, you will certainly require to do three kinds of jobs: mounting wall surfaces, installing the plumbing, and completing wall surfaces.

Prep work

To start with, you must choose the sort of shower that you desire to install. It is important to ascertain whether the selected shower is capable of dealing with specific systems and also can manage a secure level of water through the boiler. Many shower systems nowadays are created to be versatile to various water stress (such as saved warm water and also cool keys).
It is additionally important to consider the water pressure as well as the planning of the piping as well as drain for the shower

Different Kinds Of Shower Units

Push-on Mixer: The hose pipe as well as spray parts of the push-on mixer shower system can be linked to the bath tap as per your requirement, and the water temperature can be adjusted via the taps. Push-on mixers are cheap and also exceptionally straightforward to mount. Nonetheless, although the tube link is basic, it is quickly removed. Furthermore, it is inconvenient to adjust the temperature.

Bath/Shower Mixer: The tube and also spray of this sort of shower are integrated with a bath mixer tap, and the temperature level can be readjusted via the bathroom taps. It is a very cheap option and also no additional plumbing is included. However, the bath/shower mixers also deal with bothersome temperature level control alternatives.

Handbook Mixer: The hose pipe and spray of a hand-operated mixer shower device are a part of the wall device and also the hot and cold water supplies are attached to a solitary shutoff The temperature level and stress of the water are managed through either one or a variety of handles (in much more expensive showers). Although temperature control is a lot easier in hand-operated mixer types, they are more pricey than the previously mentioned mixers. They additionally need additional plumbing of cold and hot supply of water pipes.

Thermostatic Mixer: The pipe and spray of this shower kind are a part of the wall device as well as the cold and hot water materials are connected to a solitary valve below as well. It is complete with an integrated stabiliser to self-adjust the water temperature and also to prevent it from coming to be as well warm. One of the biggest benefits of a thermostatic mixer shower type consists of convenient temperature level control. However, it is one of the most expensive of the various mixer options.

Power Shower: A power shower is a solitary unit having a powerful electrical pump that is capable of changing both the water pressure as well as temperature level. This kind of shower can be fitted if there is water from a cold water cistern and also a hot water cyndrical tube. A power shower makes the adjustment of both stress and also temperature very easy. On the other hand, it is unsuitable for water heated up straight by the shower or where the water is supplied by a combination central heating boiler under mains pressure.

Electric Shower: An electrical shower is plumbed into a keys cold water supply and also it heats up the water electrically. It is necessary to keep in mind that for this shower type to be mounted, the keys pressure requires to be at least 0.7 kg/sq cm (10lb/sq in). The device allows the temperature and also stress to be adjusted by means of a handle. Models with temperature level stabilisers are much better as they remain unaffected by various other faucets in other places in operation within the home. A significant downside of electric showers is that the control knob just permits the option of high temperatures at much less stress, or lower temperatures at a higher stress. This is problematic in the winter season when the spray is frequently weak as well as the keys water is cooler. However, this problem is dealt with in some designs which are readily available with a winter/summer setup.

Method

Depending upon the kind of shower you desire to mount, the shower head must either be fitted in order to avoid its contact with the water in the bath listed below or the base tray, or it has to have a check shutoff.
Prior to starting, it is recommended to mark the settings of the shower head as well as control, as well as to intend the pipe-work entailed. Additionally, the water drainage system to remove the drainage will certainly require to be intended. Both placements of the wire route and the shower switch will also need to be thought about if an instant or electric shower unit is being set up.
Use the direction guide offered with the shower system to fit the shower control.Before fitting the pipes that will supply the water to the shower system, it is essential to cut off the supply of water. In order to safeguard the pipes, they should be given a waterproof covering and also fitted with separating shutoffs. The pipelines can after that be hidden right into the wall as well as plastered over to neaten the overall look.
Fit the base tray, shower head, and also installations.
Attach the primary shower control to the pipes that will be supplying the water (This may call for a women screw string adapter).
Reconnect the water system as well as test the pipes for any kind of leakages, as some might need tightening.
If you are installing an electric shower, bear in mind to turn off the electrical power supply before making any electric links. When these connections have been made (there should be guidance within the user's manual), the power supply can be changed back on.

Changing Water Pressure to Suit Your Shower

The cold water storage tank can be raised to a greater elevation (occasionally as low as 150mm (6inches)) by fitting a solid wood support beneath it - perhaps composed of struts and blockboards. If you pick this choice, the main and also circulation pipes will certainly likewise have to be elevated to satisfy the new elevation of the tank.
Alternatively, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is chosen, it has to be linked into the power supply in order to run.

Piping and Water drainage

It is best to utilize 15mm diameter supply pipelines, and make the go to the shower as short and also straight as feasible so as to keep maximum stress as well as reduce warm loss. Additionally, by reducing the use of arm joints for pipe corners, you can lower the resistance in the flow of the water. You can accomplish this by bending the pipes rather.

A Lot Of Common Mistakes

Going against or disregarding neighborhood code limitations.

Making use of pipes that are also small.

Affixing copper to galvanized without using a brass or dielectric suitable between the two.

Not making use of tape or pipe substance at threaded joints.

Not leveling your components when mounting them.

Not setting up an air void filling for components.

Cutting supply stub outs as well brief to set up the shutoff valves onto after the ended up wall surface is in location.

Not appropriately aligning tubes into fittings or quit valves. (Requiring the nut onto the compression ring at an angle when the tubes is at an angle will certainly create a leak.).

When transforming the water back on in your house, always run the outdoors tube valve or purge your commodes to bleed dirt and also air from the lines. This debris can trigger troubles in your sink taps and various other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

We had been brought to that editorial about Simple ways to Install a Shower Cubicle on Your Own from an associate on our other web address. Make sure you take the time to share this blog post if you liked it. Thanks for your time. Come back soon.

Book Your Service